Pairing steps in distant mode :
- Connect the Beewi-home portal using your login credentials.
- Make sure that the gateway is on Bluetooth Smart active mode Smart (Bluetooth blue button).
- Press the sync gateway button during 1 or 2 seconds.
- The gateway blue LED flashes accelerates immediately (flashing 1x every 2 seconds at 6x per second).
- Switch on the power of the Smart Bulb.
- When the gateway blue LED blinking slows down, the Smart LED Bulb is detected, the pairing begins.
- After a few moments, the image of the Smart Bulb appears on the dashboard of the devices connected to the Smart network.
- After full refresh update, the Bluetooth Smart bulb button switches to Active status (blue Bluetooth button). Your Smart Bulb is permanently synchronize.
Back to top