Pairing steps in distant mode :

  1. Press the button of the gateway for 1 to 3 seconds.
  2. The flashing of the LED accelerates immediately (the flashing goes from 1x every two seconds to 3x per second).
  3. Press the Smart Tracker button for 2 seconds until you hear two short beeps. Then continue to press the Smart Tracker button until you hear 5 short beeps.
  4. The Smart Tracker is on internet pairing mode.
  5. After a few moments, the flashing of the gateway is slowing down.
  6. The Smart Tracker has been recognized and the pairing has started.
  7. The Smart Tracker image appears on the dashboard of the Web Application network after a few moments.

Back to top